Python 3.6.5 Documentation >  Importing Modules

Importing Modules
*****************

PyObject* PyImport_ImportModule(const char *name)
*Return value: New reference.*

This is a simplified interface to "PyImport_ImportModuleEx()"
below, leaving the *globals* and *locals* arguments set to *NULL*
and *level* set to 0. When the *name* argument contains a dot
(when it specifies a submodule of a package), the *fromlist*
argument is set to the list "['*']" so that the return value is the
named module rather than the top-level package containing it as
would otherwise be the case. (Unfortunately, this has an
additional side effect when *name* in fact specifies a subpackage
instead of a submodule: the submodules specified in the package’s
"__all__" variable are loaded.) Return a new reference to the
imported module, or *NULL* with an exception set on failure. A
failing import of a module doesn’t leave the module in
"sys.modules".

This function always uses absolute imports.

PyObject* PyImport_ImportModuleNoBlock(const char *name)

This function is a deprecated alias of "PyImport_ImportModule()".

Changed in version 3.3: This function used to fail immediately when
the import lock was held by another thread. In Python 3.3 though,
the locking scheme switched to per-module locks for most purposes,
so this function’s special behaviour isn’t needed anymore.

PyObject* PyImport_ImportModuleEx(const char *name, PyObject *globals, PyObject *locals, PyObject *fromlist)
*Return value: New reference.*

Import a module. This is best described by referring to the built-
in Python function "__import__()".

The return value is a new reference to the imported module or top-
level package, or *NULL* with an exception set on failure. Like
for "__import__()", the return value when a submodule of a package
was requested is normally the top-level package, unless a non-empty
*fromlist* was given.

Failing imports remove incomplete module objects, like with
"PyImport_ImportModule()".

PyObject* PyImport_ImportModuleLevelObject(PyObject *name, PyObject *globals, PyObject *locals, PyObject *fromlist, int level)

Import a module. This is best described by referring to the built-
in Python function "__import__()", as the standard "__import__()"
function calls this function directly.

The return value is a new reference to the imported module or top-
level package, or *NULL* with an exception set on failure. Like
for "__import__()", the return value when a submodule of a package
was requested is normally the top-level package, unless a non-empty
*fromlist* was given.

New in version 3.3.

PyObject* PyImport_ImportModuleLevel(const char *name, PyObject *globals, PyObject *locals, PyObject *fromlist, int level)
*Return value: New reference.*

Similar to "PyImport_ImportModuleLevelObject()", but the name is a
UTF-8 encoded string instead of a Unicode object.

Changed in version 3.3: Negative values for *level* are no longer
accepted.

PyObject* PyImport_Import(PyObject *name)
*Return value: New reference.*

This is a higher-level interface that calls the current “import
hook function” (with an explicit *level* of 0, meaning absolute
import). It invokes the "__import__()" function from the
"__builtins__" of the current globals. This means that the import
is done using whatever import hooks are installed in the current
environment.

This function always uses absolute imports.

PyObject* PyImport_ReloadModule(PyObject *m)
*Return value: New reference.*

Reload a module. Return a new reference to the reloaded module, or
*NULL* with an exception set on failure (the module still exists in
this case).

PyObject* PyImport_AddModuleObject(PyObject *name)

Return the module object corresponding to a module name. The
*name* argument may be of the form "package.module". First check
the modules dictionary if there’s one there, and if not, create a
new one and insert it in the modules dictionary. Return *NULL* with
an exception set on failure.

Note: This function does not load or import the module; if the
module wasn’t already loaded, you will get an empty module
object. Use "PyImport_ImportModule()" or one of its variants to
import a module. Package structures implied by a dotted name for
*name* are not created if not already present.

New in version 3.3.

PyObject* PyImport_AddModule(const char *name)
*Return value: Borrowed reference.*

Similar to "PyImport_AddModuleObject()", but the name is a UTF-8
encoded string instead of a Unicode object.

PyObject* PyImport_ExecCodeModule(const char *name, PyObject *co)
*Return value: New reference.*

Given a module name (possibly of the form "package.module") and a
code object read from a Python bytecode file or obtained from the
built-in function "compile()", load the module. Return a new
reference to the module object, or *NULL* with an exception set if
an error occurred. *name* is removed from "sys.modules" in error
cases, even if *name* was already in "sys.modules" on entry to
"PyImport_ExecCodeModule()". Leaving incompletely initialized
modules in "sys.modules" is dangerous, as imports of such modules
have no way to know that the module object is an unknown (and
probably damaged with respect to the module author’s intents)
state.

The module’s "__spec__" and "__loader__" will be set, if not set
already, with the appropriate values. The spec’s loader will be
set to the module’s "__loader__" (if set) and to an instance of
"SourceFileLoader" otherwise.

The module’s "__file__" attribute will be set to the code object’s
"co_filename". If applicable, "__cached__" will also be set.

This function will reload the module if it was already imported.
See "PyImport_ReloadModule()" for the intended way to reload a
module.

If *name* points to a dotted name of the form "package.module", any
package structures not already created will still not be created.

See also "PyImport_ExecCodeModuleEx()" and
"PyImport_ExecCodeModuleWithPathnames()".

PyObject* PyImport_ExecCodeModuleEx(const char *name, PyObject *co, const char *pathname)
*Return value: New reference.*

Like "PyImport_ExecCodeModule()", but the "__file__" attribute of
the module object is set to *pathname* if it is non-"NULL".

See also "PyImport_ExecCodeModuleWithPathnames()".

PyObject* PyImport_ExecCodeModuleObject(PyObject *name, PyObject *co, PyObject *pathname, PyObject *cpathname)

Like "PyImport_ExecCodeModuleEx()", but the "__cached__" attribute
of the module object is set to *cpathname* if it is non-"NULL". Of
the three functions, this is the preferred one to use.

New in version 3.3.

PyObject* PyImport_ExecCodeModuleWithPathnames(const char *name, PyObject *co, const char *pathname, const char *cpathname)

Like "PyImport_ExecCodeModuleObject()", but *name*, *pathname* and
*cpathname* are UTF-8 encoded strings. Attempts are also made to
figure out what the value for *pathname* should be from *cpathname*
if the former is set to "NULL".

New in version 3.2.

Changed in version 3.3: Uses "imp.source_from_cache()" in
calculating the source path if only the bytecode path is provided.

long PyImport_GetMagicNumber()

Return the magic number for Python bytecode files (a.k.a. ".pyc"
file). The magic number should be present in the first four bytes
of the bytecode file, in little-endian byte order. Returns "-1" on
error.

Changed in version 3.3: Return value of "-1" upon failure.

const char * PyImport_GetMagicTag()

Return the magic tag string for **PEP 3147** format Python bytecode
file names. Keep in mind that the value at
"sys.implementation.cache_tag" is authoritative and should be used
instead of this function.

New in version 3.2.

PyObject* PyImport_GetModuleDict()
*Return value: Borrowed reference.*

Return the dictionary used for the module administration (a.k.a.
"sys.modules"). Note that this is a per-interpreter variable.

PyObject* PyImport_GetImporter(PyObject *path)

Return a finder object for a "sys.path"/"pkg.__path__" item *path*,
possibly by fetching it from the "sys.path_importer_cache" dict.
If it wasn’t yet cached, traverse "sys.path_hooks" until a hook is
found that can handle the path item. Return "None" if no hook
could; this tells our caller that the *path based finder* could not
find a finder for this path item. Cache the result in
"sys.path_importer_cache". Return a new reference to the finder
object.

void _PyImport_Init()

Initialize the import mechanism. For internal use only.

void PyImport_Cleanup()

Empty the module table. For internal use only.

void _PyImport_Fini()

Finalize the import mechanism. For internal use only.

PyObject* _PyImport_FindExtension(char *, char *)

For internal use only.

int PyImport_ImportFrozenModuleObject(PyObject *name)

Load a frozen module named *name*. Return "1" for success, "0" if
the module is not found, and "-1" with an exception set if the
initialization failed. To access the imported module on a
successful load, use "PyImport_ImportModule()". (Note the misnomer
— this function would reload the module if it was already
imported.)

New in version 3.3.

Changed in version 3.4: The "__file__" attribute is no longer set
on the module.

int PyImport_ImportFrozenModule(const char *name)

Similar to "PyImport_ImportFrozenModuleObject()", but the name is a
UTF-8 encoded string instead of a Unicode object.

struct _frozen

This is the structure type definition for frozen module
descriptors, as generated by the **freeze** utility (see
"Tools/freeze/" in the Python source distribution). Its
definition, found in "Include/import.h", is:

struct _frozen {
char *name;
unsigned char *code;
int size;
};

const struct _frozen* PyImport_FrozenModules

This pointer is initialized to point to an array of "struct
_frozen" records, terminated by one whose members are all *NULL* or
zero. When a frozen module is imported, it is searched in this
table. Third-party code could play tricks with this to provide a
dynamically created collection of frozen modules.

int PyImport_AppendInittab(const char *name, PyObject* (*initfunc)(void))

Add a single module to the existing table of built-in modules.
This is a convenience wrapper around "PyImport_ExtendInittab()",
returning "-1" if the table could not be extended. The new module
can be imported by the name *name*, and uses the function
*initfunc* as the initialization function called on the first
attempted import. This should be called before "Py_Initialize()".

struct _inittab

Structure describing a single entry in the list of built-in
modules. Each of these structures gives the name and
initialization function for a module built into the interpreter.
The name is an ASCII encoded string. Programs which embed Python
may use an array of these structures in conjunction with
"PyImport_ExtendInittab()" to provide additional built-in modules.
The structure is defined in "Include/import.h" as:

struct _inittab {
char *name; /* ASCII encoded string */
PyObject* (*initfunc)(void);
};

int PyImport_ExtendInittab(struct _inittab *newtab)

Add a collection of modules to the table of built-in modules. The
*newtab* array must end with a sentinel entry which contains *NULL*
for the "name" field; failure to provide the sentinel value can
result in a memory fault. Returns "0" on success or "-1" if
insufficient memory could be allocated to extend the internal
table. In the event of failure, no modules are added to the
internal table. This should be called before "Py_Initialize()".